Technical requirements for Aluminum PCB
Main technical requirements:
Dimensional requirements, including board dimensions and deviations, thickness and deviation, verticality and warpage; appearance, including cracks, scratches, burrs and delamination, aluminum oxide film, etc.; performance, including peel strength, surface resistivity , minimum breakdown voltage, dielectric constant, flammability and thermal resistance requirements.
Special inspection method for aluminum-based copper clad laminates:
1.The dielectric constant and dielectric loss factor measurement method. It is a variable-Q series resonance method. The principle that the sample and the tuning capacitor are connected in series to the high-frequency circuit to measure the Q value of the series circuit;
2.The thermal resistance measurement method, which is calculated by the ratio of the temperature difference to the thermal conductivity between different temperature measurement points.
Please,contract us if you need costomize your own aluminum PCB prototyping,send you gerber file and bom list to firstname.lastname@example.org via email.