Home Theater ,Electronic Machine PCB
Prototype&Low Volume PCB Assembly,from 1 Board to 250,is specialty,or up to 1000
Type of Assembly
Water Soluble Solder Paste,Leaded and Lead-Free
Passive Down to 0201 size
BGA and VFBGA
Leadless Chip Carriers/CSP
Double-sided SMT Assembly
Fine Pitch to 0.8mils
BGA Repair and Reball
Part Removal and Replacement
Bare Board Size
Bill of Materials
Types of Service
Turn-key,partial turn-key or consignment
Cut Tape,Tube,Reels,Loose Parts
Same day service to 15 days service
Flying Probe Test,X-ray Inspection AOI Test
PCB assembly process
Drilling-----Exposure-----Plating-----Etaching & Stripping-----Punching-----Electrical Testing-----SMT-----Wave Soldering-----Assembling-----ICT-----Function Testing-----Temperature & Humidity Testing
----Professional Surface-mounting and Through-hole soldering Technology
----Various sizes like 1206,0805,0603 components SMT technology
----ICT(In Circuit Test),FCT(Functional Circuit Test) technology.
----PCB Assembly With UL,CE,FCC,Rohs Approval
----Nitrogen gas reflow soldering technology for SMT.
----High Standard SMT&Solder Assembly Line
----High density interconnected board placement technology capacity.
NOEYA PCB CAPABILITY:
FR-1/FR-4 / High TG FR-4 / Lead free Materials (ROHS Compliant) / Halogen Free material /CEM-3/CEM-1/ /PTFE/ROGERS/ARLON/TACONIC FPC
3.Finised inner/outer copper thickness
4.Finished board thickness
Board thickness≤1.0mm: +/-0.1mm
1<Board thickness≤2.0mm: +/-10%
Board thickness>2.0mm: +/-8%
5.Max panel size
Multilayer PCB: 500*1200mm
6.Min conductor line width/spacing
Inner layers: ≥3/3mil
Outer layers: ≥3.5/3.5mil
7.Min hole size
Mechanical hole: 0.15mm
Laser hole: 0.1mm
Drilling precision: first drilling
First drilling: 1mil
Second drilling: 4mil
Board thickness≤0.79mm: β≤1.0%
0.80≤Board thickness≤2.4mm: β≤0.7%
Board thickness≥2.5mm: β≤0.5%
10. Aspect Ratio
11.Min welding ring
12.Min solder mask bridge
13.Plugging vias capability
14. Hole tolerance
Rout/ V-cut/ Bridge/ Stamp hole
Lead free HASL: 2-40um
ENIG: Au 1-10U’’
ENEPIG: PB 2-5U’’/ Au 1-8U’’
Immersion silver: 0.1-1.2um
Peelable blue mask
Gold plating: Au 1-150U’’
17. E-testing pass percent
97% pass for the first time,+/-2%(tolerance)
FQC-Physical Lab: Reliability tests
4 drilling bits of drilling machine: 4 sets
2 drilling bits of drilling machine: 2 sets
2. photo plotting workshop
Israel “ORBOTECH” Photo Plotters
“OXFORD” CMI 700 Copper Thickness Tester
USA “Tektronix” DSA 8200 Impedance Tester
CNC routing machine: 7 sets
Surpass X-600: 2sets
WTD FT-2808: 5sets
WTD HV300: 1set
Acceptable file format
GERBER file, PROTEL series, PADS series, POWER PCB series, AutoCAD series.
Packaging and Shipping
Noeya can reliably manufacture up to 8 layer,the material, FR4,FR-1(94V0,94HB)and CEM-1 are all available for us. all pcb with these base material are at competitive prices. We also offer mixed board multilayer panels to ensure your prototyping costs are kept to a minimum. We are able to produce Prototype, and Medium to Large Production Runs with short lead times - 5 Days is considered normal for the majority of these jobs, and can build PCB boards for you using non-leaded surface finishes that are RoHS compliant.
Our manufacturing capacity of the company was expanded rapidly. Double-side and multi-layer PCB (1L-8L)with high and accurate yearly output is over 800, 000 square meters, and most of our products have been sold to the market of Europe, North America, South America and Australia.We have enjoyed good reputation among the same occupations both at home and abroad for our professional manufacturing technology, stable product quality and exquisite craftsmanship measure.
Our products main application area is: Medical Instrumentation, Telecommunication apparatus, industry power, Automotive, Liquid crystal module, Peripherals, Computing & storage, Consumer, Networking, satellite receiver (DVB), worker person who accuse of Hi-Tech trade is it produce and design the technological service to offer.
Until now, we won ISO9001-2000 Quality Management System authentication and all the products were passed UL certificate. Since built our office in Shenzhen, we have been expanding our overseas markets, especially tending to the Emerging markets: like South America (Brazil), and mid-east, all because of our price advantage.
Foundation of our company, we have concentrated on the craftsmanship development and made efforts to upgrade the technology level and manufacturing capacity in the professional field of PCB, OEM and finally we achieved good results. We consider every client as our gods, we can meet all our clients requirements whether the order is sizable or small or prototype.
1.Which type of PCBs do you expert in?
We are specialized in producing HDI multilayer blind, BGA, impedance, half-hole, double-sided, single-sided, etc.
We are OEM on PCB boards with experience over 9 years.
3.What is your Lead time?
Lead time is usually punctual here, for some special situation, we can also advise customer in advance to avoid any inexpectation or loss at customer side.
4.What is your testing policy and how you controle the quality?
For sample, usually tested by flying probe; for PCB Volume over 3 square meters, usually tested by fixture, this will be more faster. Due to there’s many steps to PCB production, we usually do inspection after every step.
5.What is your certificate?
ISO/TS16949: 2000, ISO14001: 2004, UL, SGS, CE&RoHS report. We can provide the report of raw material based on customer’s requirement.
6.What is your package?
With Inner vacuum package and out carton.
This is depend on customer, sometimes we ship through our forwarder, who is also the agency of DHL, TNT, UPS, Fedex, and so on. Our forwarder can provide too much better freight cost than we get directly from those express enterprise.
8.What is your produce ability?
Our ability is average 40,000 square meters per month.
9.I only have the pcb sample, not pcb file, can you produce it for me?
Yes, we can copy file based on your sample, this file names gerber, and production then is accorded to gerber file.
10.Can you design gerber file?
We can design gerber file if customer can provide us schematic, schematic sample can also be provided if customer want.
11.What kind of PCB file format can you accept for production? What CAM software do you use?
We accept Gerber file for production. CAM350, GENESIS, UCAM, GC-CAM, V-2000.
12.Will you allow me to put several part number together into one panel?
Yes, this is usually happen in we factory, this way can help customers reduce some cost and to a certain degree, it can help reduce some assembly cost.
13.What material brand you use for your PCB?
KB, SL, NANYA, TACONIC, ROGERS and so on.
14.What is your minimum order quantity?
We have no limitation on MOQ, prototype, medium volume and large volume are all acceptable.
15.Will RoHS Lead-Free Custom Spec. Boards be marked with lead-free symbol?
Yes, can, but need customer to specify this requirement in file.
16.Are my design files safe when I submit them to you for manufacturing?
Any customer’s file will be protected very well here in our factory and we will not let any third party know. We can sign NDA with you.
17.Quotation requirement for PCB Assembly ?
Gerberfile and BOM list, clear pics of PCBA or PCBA sample for us, test method for PCBA.
Welcome to contact me!
My Skype: Noeya08-pcb
Trade Manager: cn1000175212